RK95-03 Solar power supply system consists of solar panel, solar controller, battery and the inverter (optional). Solar energy is a clean renewable new energy, has no moving parts, no noise, no pollution, high reliability. It can provide reliable power to sensors or weather stations, mainly used for wireless sensor, automatic test station, automatic weather stations and other power supply.
Solar panel voltage
Float charging voltage
Boost charging voltage
Equalizing charging voltage
Over voltage protection
Over voltage recovery
Under voltage protection
Under voltage recovery
Commercial power start voltage
Commercial power shutoff voltage
Overload, short protection
Controller cannot be directly connected to the AC110V/AC220V,the AC must be converted to DC(12V/24V),then connect to the controller.
Single wireless(WIFI,GPRS,Lora, etc.) sensor
RK160-02,RK200-05 or RK400-03
1. Suggest user to ready battery, because the battery is not convenient to transport;
2. The size of the protective box according to the project need to customize;
3. Cable length can be customized.
The controller has 4 work modes:
1. Light & time control: Mode=1-15: When there is no sunlight start the load, time control shutoff(1-15 hours);
2. Light control Mode=16: When there is no sunlight start the load,when the light appear, shut down load;
3. Normally open Mode=17: Keep the output state 24 hours a day;
4. Manual mode Mode=18:Manual mode.
5. Press the button for 5 s, digital tube start flashing, product into regulating mode, loosen the button, each time you press the button, the number will increase, and the set up, about 5 s digital tube stop flashing, exit mode Settings.