Rika Sensor is a weather sensor manufacturer and environmental monitoring solution provider with 10+ years of industry experience.

The correct use of the water sensor in the computer room renovation plan

by:Rika Sensors     2021-12-05
The correct use of the water sensor in the computer room renovation plan
The rapid development of intelligence has caused major changes in people’s lives. The rapid development of computer technology has led to the rapid development of computer infrastructure construction, whether it is in the complex large-scale data center computer room or the simple small and medium-sized In the computer room, more and more electrical equipment is being deployed in the computer room.

The computer room renovation project is one of the projects that many communication people are currently doing. With the technological update and the development of the enterprise, the original computer room configuration cannot meet the existing needs, and there is a greater need for confidentiality and timeliness. Because of the high requirements, higher standards are put forward for the network system equipment and environment of the computer room, and many companies will choose to upgrade the computer room.

In order to ensure the safe, stable and effective operation of the computer room, the good operating status of the network equipment and the service life and safety of the equipment, it usually affects the power supply, temperature, humidity, water leakage, and air dust content of the network operating environment. Environmental variables, 24-hour real-time monitoring and intelligent adjustment and control to ensure the stability of the network operating environment, the safety of network software and hardware resources, equipment, and related information and data assets.

As an important part of the computer room environment monitoring system, the water immersion sensor is mainly used to monitor whether there is water leakage in places with water sources such as fire water pipes and domestic water pipes. Once water leakage occurs, it will trigger the flood sensor, report the danger, and the gateway will send out an audible and visual alarm. At the same time, the detector will send the alarm information to the mobile phone APP and issue an alarm to remind people to take timely measures to prevent the water leakage problem and prevent the loss of property . So what are the reasons for water leakage in the computer room?

1. Leakage of the generator in the machine room.

2. The heating equipment in the computer room leaks.

3. Leakage or leakage of walls and roofs.

4. Water ingress caused by imperfect doors and windows when it rains.

5. Water pipes or fire-fighting system pipes in the machine room are blocked and leaking.

For the leakage of the computer room, how should we use the water sensor to monitor the leakage of the computer room correctly and reasonably?

At present, there are two main methods for leak detection: point-type flooding sensor and distributed flooding sensor. Point-type flooding sensor is determined by the environmental conditions and the distribution of sensing points. The leakage may be very large and reliable. Sex is not guaranteed. The distributed water immersion sensor is to surround the water source with a special rope, which can prevent troubles in the true sense and reduce the hazards.

(1) Elimination method of point-type water immersion sensor:

1. Check whether there is a source of water leakage.

2. Check whether the point-type water immersion sensor is in contact with the metal

3. Check whether the point-type water immersion sensor is too close to the humidifier of the air conditioner, which causes the air conditioner to be humidified due to excessive humidity. When the water dries, the alarm will automatically recover.

(2) Elimination method of distributed water immersion sensor:

1. Check whether there is a source of water leakage.

2. Check whether the water immersion sensor cord is in contact with the metal

3. Check whether the water immersion sensor cord is too close to the humidifier of the air conditioner, causing excessive humidity and leakage alarm when the air conditioner is humidified.

The elimination method of distributed water immersion sensor:

1. Check whether there is a source of water leakage.

2. Check the water immersion sensor rope, and check whether the water immersion sensor rope is too close to the humidifier of the air conditioner, which causes excessive humidity and leaks when the air conditioner is humidified.

3. Check whether the leaking sensor cord is dirty, oily, or small water droplets, which triggers an alarm. If this is the case, please clean the leaking sensor cord.



sensor solution has become a standardized way of dealing with OEM sensor.
Hunan Rika Electronic Tech Co.,Ltd promises you that you will be satisfied with our service.
Simultaneously being able to offer not only the product but also the service, gives the customer a quality 'one-stop-shop' service.
To have a that needs much precaution in handling, it is best to rely only on reliable providers. Hunan Rika Electronic Tech Co.,Ltd can provide quality environmental monitoring systems sensor solution that meet all your requirements for a while meet your individual needs.
Custom message
这里可以自定义设置
Chat Online
Chat Online
Chat Online inputting...