Work-at-height safety accidents are frequent, how to prevent them?

This monitoring program can help you do risk prevention and control!

In recent years, with the development of the globalization of the world industry, material handling engineering has become one of the most promising fields in modern industry.

Aerial work equipment (including tower cranes, marine cranes, etc.) is an important kind of special equipment in the field of large material handling, which has a wide range of types, strong functions, wide range of use and other characteristics. Various kinds of aerial work equipment are widely used in ports and terminals, steel plants, mines, construction sites and other place

However, with the extensive development and use of this type of aerial work equipment at the same time, there are many problems and safety accidents occur.

For example, the equipment in the process of use, due to external environmental factors, such as high winds, overweight load, poor road conditions and other external cause, may lead to equipment collapse of major accidents, threatening the safety of life and property.

And how to predict these adverse safety hazards in advance, RIKA technology to develop a professional solution. RIKA Technology designed the wind speed and inclination sensor products online real-time monitoring solutions, you can easily obtain a variety of monitoring data, with the use of a variety of automated control equipment, can effectively prevent a variety of safety accidents.

The importance of wind speed monitoring

In docks, ports and construction sites, overhead equipment is often grouped together due to the simultaneous operation of multiple equipment. Due to the characteristics of this group, if faced with huge winds and not prevented in time, it is very likely that equipment collapse and collision with equipment group interference will occur, which will cause huge loss of life and property.

In addition, also because of the aerial work equipment its large, wind operation is difficult to resist the wind and other characteristics, in the absence of timely observation of wind speed, often not timely control of the machine and personnel from the situation caused by equipment falling and casualties.

Therefore, in order to prevent such situations in a timely manner, the role of wind speed sensors in the aerial equipment industry has become pivotal. The wind speed sensor can send an alarm if the wind speed is exceeded by a high wind effect. This allows staff to respond in time to prevent major life and property accidents before the onset of high winds.

Picture

The importance of inclination measurement

With the development of waterway handling and construction industry, aerial work equipment has been commonly used, but at the same time, because of its aerial work characteristics (such as difficult to control, easy to swing, single support point, etc.) thus leading to tipping accidents occur from time to time, easily causing casualties and property damage.

The specific performance of the equipment in the lifting process tilt pulling, pile pulling, equipment foundation water makes the foundation pile settlement is not the same causing the body tilt, hanging scaffolding in the lifting process or heavy weight bundle is not secure, the sudden unloading of heavy equipment after the sudden increase in tilting force and other factors, making the equipment in the lifting process prone to tipping accidents.

Picture

Therefore, it is important to use the tilt sensor to measure the tilt condition of the aerial work equipment in time and prevent it in advance. The tilt sensor can effectively prevent equipment tipping accidents, by detecting the balance of the equipment to achieve the purpose of safety checks, and can alert people through the alarm mechanism to check the existence of machine safety hazards.

 RIKA professional aerial equipment monitoring solutions

The most important component for the safety and security of aerial work platforms is the sensor, for this reason, RIKA Technology has established a professional aerial equipment monitoring solution with its advantages in the sensor industry, and now provides aerial work monitoring equipment for many countries and regions in China and abroad.

RIKA Technology aerial equipment safety detection system is mainly used to detect the state of the aerial work platform operating objects, operating environment, to provide measurement data for effective control of the platform's movements. Its main use is the wind speed sensor and wind speed alarm meter, as well as the inclination sensor, etc.

Aerial equipment solutions main products introduction

RK100-01windspeedsensor

The RK100-01 wind speed sensor is designed for accurate and reliable measurement of wind speed under harsh environmental conditions.

Built-in digital circuit with strong immunity to electromagnetic interference and RF radiation and automatic temperature compensation, it outputs voltage and current signals through electromagnetic induction, and its output value is linearly related to the wind speed value.

The housing is made of high-strength aluminum alloy, and the PCB board is coated with anti-corrosion coating, which has the ability of waterproof and anti-corrosion.

The internal and rotating position are equipped with sealing ring, which has good sealing function and can prevent water, salt spray and dust from entering.

RK150-01 Anemometer

The RK150-01 anemometer provides an intuitive display of real-time wind speed via a digital LED display. Built-in microprocessor with high performance and low power consumption. The wind speed warning and alarm values can be set via buttons on the panel.

The RK150-01 requires the RK100-01 wind speed sensor to be used in conjunction with the RK150-01 wind speed sensor.

RK700-01 Dual axis tilt sensor

RK700-01 is a digital small size inclination sensor. The built-in high-precision tilt measurement unit converts the static gravitational acceleration into tilt angle change, which allows measuring the tilt and pitch angle of the sensor output relative to the horizontal plane.

Output RS232, RS485 or TTL level interface standards are available. Widely used in industrial inclination measurement, is ideal for industrial automation control, platform measurement attitude, strong anti-electromagnetic interference ability, can adapt to long-term work in the harsh industrial environment.

Customer Case Show

Tower aerial safety monitoring project

Car crane safety monitoring project

Tower crane safety monitoring project

Tower crane safety monitoring project